Notes

Quick notes

Short tips to look up while designing.

PCB Editor

Status first

Display > Status shows DRCs, unrouted nets and out-of-date shapes in one place. Open it before generating any output.

PCB Editor

Database Check

Tools > Database Check with DRC and shape updates fixes database inconsistencies before the final review.

PCB Editor

Global shape parameters

Shape > Global Dynamic Parameters adjusts thermal reliefs and void clearances of all dynamic shapes at once.

PCB Editor

Footprint changed? Update it

After fixing a footprint in the library, use Place > Update Symbols to bring the new version into the board.

PCB Editor

Units, grid and accuracy

Setup > Design Parameters holds units, decimal accuracy, grids and display. Set them in the company template.

Capture CIS

Empty PCB Footprint

Before the netlist, generate a BOM including the PCB Footprint property and filter blanks: the fastest way to find symbols without a footprint.

Capture CIS

Schematic DRC

Tools > Design Rules Check finds single-pin nets and duplicate references — errors that become hours of debugging in layout.

Capture CIS

Read netrev.lst

If the import fails, the netlist log file tells you exactly which footprint is missing or which pin does not match.

IPC

The right class on the order

The bare-board class (IPC-6012 / IPC-A-600) and the assembly class (IPC-A-610 / J-STD-001) must be consistent and written in the fabrication notes.

IPC-7525

QFN thermal pad

Split the paste aperture into windows (windowpane) covering part of the area instead of a single opening: fewer voids and less component floating.

IPC-1601

Moisture and storage

Moisture-sensitive boards and components (J-STD-033) need controlled storage and, when required, baking before reflow.

DFM

Fiducials

Common practice: 3 fiducials per side, ~1 mm copper pad with a 2–3 mm mask opening, away from the edge and with nothing nearby.

DFM

Readable silkscreen

Typical minimum line around 0.15 mm and text height ≥ 0.8 mm. No legend over pads — the fabricator will clip it.

SI/PI

Return path

A fast signal never crosses a plane split. When changing layers, place a ground via next to the signal via so the return follows.

SI/PI

Decoupling

Decoupling capacitor as close as possible to the pin, with short, direct vias to the plane. Mounting inductance matters more than the capacitor value.

SI

The 3W rule

Rule of thumb to reduce crosstalk: center-to-center trace spacing of ~3× the width. Confirm with simulation on critical signals.